SummaryRoland's new video converters address the demand for high-quality, lossless video and audio converters for live/post production as well as installed systems. They include theRoland VC-1-HS(HDMI to SDI),VC-1-SH(SDI to HDMI),VC-1-DL(Bi-directional SDI/HDMI with audio/video delay and frame sync) andVC-1-SC(Up/Down/Cross Scan converterto/from SDI/HDMI).The VC-1 Video Converter seriesThe VC-1 Video Converter series provides uncompromising picture quality by maintaining the video characteristics of the original signal. There are no interlacing artifacts or other conversion or signal errors sometimes found with other video converters. The VC-1 series also features an on-board re-clocker to compensate for attenuation of SDI signals carried over long distances. The VC-1 series also supports both level A and B 3G-SDI, letting you connect a variety of higher quality SDI sources. The VC-1-SC also enables input from analog sources such as RGB and component along with built-in scaler.The VC-1 series is HDCP compliant allowing you to convert or pass-through HDCP signals with the exception of any SDI output. Selectable audio embedding or de-embedding lets you route different audio sources to or from video devices.Features3G (Level A&B) /HD/ SD SDIHDMI In/OutRGB/Component InComposite InHDCP SupportBuilt-in Frame Synchronizer and ScalerAudio Embedding or De-EmbeddingVC-1 RCS, PC/MAC Control ApplicationUp/Down/Cross, Frame Rate, I/P, and Aspect Ratio ConversionSpecificationsInputSDI Connector: 1 x BNC typeSignal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-CHDMI Connector: 1 x Type A (19 pins)Signal Standard: HDMI HDCP support (When an HDCP-applied signal is input, output from the SDI OUT connector is stopped)RGB/Component Connector: 1 x HD DB-15 typeSignal Level: 1.0 Vp-p (Y signal), 0.7 Vp-p (R/G/B/Pb/Pr signals), 5 VTTL (H/V signals)Impedance: 75 Composite Connector: 1 x BNC typeSignal Level: 1.0 Vp-p (Y signal), 0.286 Vp-p (C signal (NTSC)), 0.3 Vp-p (C signal (PAL))Impedance: 75 Analog Audio Connector: RCA phono type x 1 pair (L/R) (Combined use with Analog Audio Out Connector)Input Level: -6 dBVMaximum Input Level: +6 dBVImpedance: 22 kReference Connector: 1 x BNC typeReference Signal Format: Black Burst, Bi-level, Tri-levelReference Impedance: 75 OutputSDI Connector: 2 x BNC type (One is Combined with SDI In Connector)Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-CHDMI Connector: 1 x Type A (19 pins)Signal Standards: HDMI HDCP supportAnalog Audio Connector: RCA phono type x 1 pair (L/R) (Combined use with Analog Audio In Connector)Input Level : -6 dBVMaximum Output Level : +6 dBVImpedance : 2.2 kSDISignal Standards : SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-CVideo Format : 1920 x 1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i,1920x1080/30PsF/29.97PsF/25PsF/24PsF/23.98PsF (Conforms to SMPTE 274M) 1280 x 720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p (Conforms to SMPTE 296M) 720 x 480/59.94i, 720x576/50i (Conforms to ITU-R BT.601-5)Color Format: 10 bits YCC 4:2:2Audio Format: Linear PCM, 24 bits, 48 kHz, 16 channel (Conforms to SMPTE 299M, SMPTE 272M-C)When frame synchronizer is working, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available.HDMIVideo Format: 1920 x 1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i, 1280 x 720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p, 720 x 480/59.94p/59.94i, 720 x 576/50p/50i (Conforms to CEA-861-E)PC Format : 640 x 480/60/72/75/85Hz, 800x600/56/60/72/75/85 Hz, 1024 x 768/60/70/75/85 Hz, 1280 x 768/60/75/85 Hz, 1360 x 768/60 Hz, 1152 x 864/75 Hz, 1400 x 900/60/75/85 Hz, 1280 x 960/60/85 Hz, 1280 x 1024/60/75/85 Hz, 1400 x 1050/60/75 Hz, 1680 x 1050/60 Hz, 1600 x 1200/60 Hz, 1920 x 1200/60 Hz Reduced blanking (Conforms to VESA DMT Ve
